Basic Operations - Wiko WiSHAKE Guide Utilisateur

Hello! Let's see how it works...

1. Basic operations

Turn ON
~
To turn on WiSHAKE TW earphones, please press the
multifunction button on each earphone once. You will
hear a four tone rising scale and the LEDs will flash white
3 times.
The LED in both earphones will blink red and white once
per second.
Turn the earphones OFF
~
To turn off your earphones, please long press the multi-
function button for 3 seconds. You will hear a four-tone
falling scale and LEDs will flash white for 7 times.
Note: When the earphones are on and not connected to
a device, after 10 minutes of inactivity, they will turn off
automatically to save power.
Charging
~
• Charging dock
To charge the charging dock, please connect to a computer
or power source via USB. The colour of the LED in the
middle indicates the battery level. To know the battery
level, please refer to the following table:
Battery Led During
Level Colour charging
< 25 %
Red Flash
26 to 85 % Blue Flash
86 to 99% White Flash
100% White Continuous
To see the charging dock battery level without charging,
please press the button. The colour of the LED will turn on
for 5 seconds and then turn back off.
• Earphones
To charge WiSHAKE TW earphones please place them in-
side the Wiko charging dock and make sure they sit correct-
ly in the pin connectors. To activate the charging function,
Not charging
(Press button)
Illuminates for 5
seconds
Illuminates for 5
seconds
Illuminates for 5
seconds
Illuminates for 5
seconds