HYVA HOS-0002 Mode D'emploi
Table des Matières
Manuels Connexes pour HYVA HOS-0002
Sommaire des Matières pour HYVA HOS-0002
- Page 1 HOSE KIT SIDE MOUNTED VALVE MOUNTING INSTRUCTIONS HOS-0002...
-
Page 2: Table Des Matières
PARTS FOR HOSE KIT SIDE MOUNTED VALVE ........................3 STEPS FOR MOUNTING ALLEN PLUG ............................5 STEPS FOR MOUNTING RETURN LINE FILTERS ........................6 STEPS FOR MOUNTING VALVE & HOSE KIT ........................... 7 HOSES ........................................... 10 subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB... -
Page 3: Parts For Hose Kit Side Mounted Valve
VALVE A. PARTS FOR HOSE KIT SIDE MOUNTED VALVE 1. HOSE KIT PARTS Description Hyva Oil tank-SM tank (with mounti ng plates) Mounting box: RF valve side – 2 ports Return hose 1”-HP16-00550-00-9088 BAR SPI 1/2” BSPOT-Allen plug DIN 906 Adapter HP-T-SW-1”... - Page 4 08 Adapter kit 90 degrees for Return line filter 09 Bolt for Return line filter with adapter Nordlock washer M8 Adapter O-ring HT Valve Cyl. Head bolt for HT valve subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB...
-
Page 5: Steps For Mounting Allen Plug
➢ For part number refer to table on page 1, position 2.2 1. Remove temporary plug from mounting plate 2. Add plug in 1/2” BSPOT-Allen Plug DIN906 1.5 Nm / 1.1 ft*lbf subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB... -
Page 6: Steps For Mounting Return Line Filters
House version Return line filter *20 Nm / 14.8 lbf*ft *Note: Possibility of 2 or 4 bolts used. b. Plate version Return line filter 20 Nm / 14.8 lbf*ft subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB... -
Page 7: Steps For Mounting Valve & Hose Kit
D. STEPS FOR MOUNTING VALVE & HOSE KIT ➢ For part number refer to table on page 1 & 2, position 01 - 13 1. ADD O-RING TO VALVE subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB... - Page 8 Al = 12 Nm / 09 lbf*ft 3. HOSE KIT WITH RETURN LINE FILTERS. a. WITH PLATE VERSION Option Hose: is for a possibility of a second line. subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB...
- Page 9 HOSE KIT SIDE MOUNTED VALVE b. WITH HOUSE VERSION Option Hose: is for a possibility of a second line. Warning : Use 2 spanners to prevent over torquing in the valve. subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB...
-
Page 10: Hoses
As mangueiras não devem ser instaladas esticadas ou com raio de curvatura inferior às recomendações do fabricante. • Os parâmetros de funcionamento (como pressão, temperatura) devem ser respeitados. subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB... - Page 11 Для обеспечения безопасности эксплуатации все линии должны быть закреплены. • На всех линиях не допускается натяжение или слишком маленький радиус закругления. • Рабочие параметры (такие как давление, температура) должны быть соблюдены. subject to change without notice OH-E HOS-0002 / 28-06-2021 / RV AB...