Simons Voss Technologies Digital Padlock AX Guide Abrégé page 30

5. Battery replacement
Maintaining the condition during battery replacement
The Digital Cylinder AX cannot engage or disengage without power sup-
ply. Therefore, while the batteries are removed, the Digital Cylinder AX
retains its current locking status and its data status (programming and
stored logs).
30 / 100
Special tool available.
ü
1. Align the thumb turn horizontally.
1
2. Attach the special tool.
2
3. Align the special tool so that the logo is parallel to
the recess.
3
4. Hold the special tool and thumb turn cap firmly at
the same time and turn them together 1-2° clock-
wise first and then counter-clockwise.
4
5. Remove the tool and cover.
5
6. Push the latch inward and open the battery cover.
6
7. Remove the batteries with the special magnetic
tool.
7
8. Insert the new batteries (positive poles touching in
the middle).
8
9. Close the battery cover.
Cylinder signals the successful change with
9
triple red flashing and beeping.
Digital Padlock AX (Z5.PL)
EN