Publicité
Les langues disponibles
Les langues disponibles
Cleaning and Maintenance
Remove the plug from the wall socket and allow the appliance to cool down
few minutes before cleaning.
Note: Remove all the remaining pulp in the juicing bowl after stopping the
juicer.
• After the juice is extracted, running the juicer for 30 seconds to clean
easier.
• When the feed tube is stuck, press the REVERSE-STOP-START button,
following this order, switching back and forth 2 to 3 times to dislodge. Then
place your hands on the top of the drum lid and firmly press down
simultaneously turning the drum lid counter clockwise to open.
1. The best way to clean the motor section is with a slightly dampened
cloth and, if necessary, a little detergent. Do NOT immerse the motor
section in any form of liquid!
2. The centrifuge bowl, fruit pulp holder and all other detachable parts
can be washed up by hand.
3. Be careful not to touch the sharp parts in the bottom of the
centrifuge bowl.
4. Do not use any kind of strong or abrasive cleaning agent on the
appliance or its accessories. Never use a scouring sponge or similar
to clean it, as the surface may be damaged.
5. Allow all parts of the appliance to dry completely before
reassembling it after cleaning.
6. The detachable elements like juice bowl, screw, etc should not be
placed into the dishwasher as it may alterate their orginal color.
Normal troubleshooting
When the machine is damaged. Stop using the machine and ask
1.
customer service for help.
When you are unable to install the machine after reading the instruction,
2.
please install the machine gently, you can ask our customer service for
help.
When using for the first time, if there is bad smell, please clean it and
3.
explode into air for 12 hours before using. Then the smell will disappear.
EN-15
Publicité
