Raider PRO RDP-BCLM20 SOLO Mode D'emploi page 20

20 www.raider.bg
Press and hold in the safety Lock-Off Button
Hold in the Safety Lock-Off Button and pull the Switch Lever upwards towards the handle and hold in
this position.
The motor will now start.
Release the Safety Lock-off Button.
To stop the mower simply release the Switch Lever and the mower will stop.
Warning: The blades will continue to rotate for some
time after the mower has been switched off. Make sure that the blades have come to complete stop
and that you have removed battery packs from lawn mower before carrying out any maintenance.
Height Adjustment
For height adjustment proceeds as follows:
Warning: Stop, release switch lever and wait until
the motor stops. The blades continues to rotate for a few second after the machine is switch off, a
rotating blade can cause injury. For the first cut of the season, a high cutting adjustment should b
selected.
This machine can be set to tree height of cut. I = 20 mm II = 35 mm III = 50 mm.
Pull Height adjustment lever to the broadside. Push the adjustment lever to the front or back.
combine them, then you turn on the machine rear cover, align the
When the adjustment lever is in the front, the height is toppest, when in the back, the height is
the lowest. Note: For long grass, start mowing with the highest setting and then gradually reduce the
height of cut.
located on the switch box.