EN
9
TROUBLESHOOTING
Problem
Appliance does not work.
The food is too warm.
Appliance cools too
much.
Unusual noises.
Possible cause
Mains plug is not
plugged in or is loose
Fuse has blown or is
defective
Temperature is not
properly adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Temperature is set too
cold.
Appliance is not level.
The appliance is touching
the wall or other objects.
A component, e.g. a
pipe, on the rear of the
appliance is touching
another part of the
appliance or the wall.
Solution
Insert mains plug.
Check fuse, replace if
necessary.
Please look in the initial
Temperature Setting
section.
Open the door only as
long as necessary.
Turn the temperature
regulation to a colder
setting temporarily.
Please look in the
installation location
section.
Turn the temperature
regulation knob to
a warmer setting
temporarily.
Re-adjust the feet.
Move the appliance
slightly.
If necessary, carefully
bend the component out
of the way.