Publicité
Read this first
This booklet guides you on how to use and maintain your new Portable receiver. Ensure
you read this booklet carefully, including the
the most out of your product. If you have additional questions, contact your hearing
care professional.
Intended purpose
The intended purpose of the Visit system is to alert deaf and
hard of hearing people of important signals in their home.
Intended user
A person with mild to severe hearing loss or deafness.
Intended user group
The intended user group consists of people of all ages with
mild to severe hearing loss or deafness that need audio, visual
or sensory amplification.
Principle of operation
The Visit alerting system consists of a set of wirelessly con-
nected transmitters and receivers that are located across the
home. When a transmitter detects an activity, it signals the Visit
receiver that alerts the user with sound, flashes or vibrations. In
order to use the system, you need at least one transmitter and
one receiver.
Overview
1
2
3 4
7
1
4
Power LED
Visit LEDs
2
Volume dial
5
Flash signal switch
3
Flash LEDs
6
BE1270 Bed shaker
4
Warnings
section. This will help you get
5
6
8
9
7
Test button
8
Battery compartment
9
Optional power supply
Getting started
1
Slide open the battery cover, fit the batteries and close the cover again.
Place the receiver on a level surface or mount it on the wall using the wall bracket.
2
To test the radio link you need a Visit transmitter. Press the test button/s on
the transmitter.
3
The receiver lights up a Visit LED (4) and starts to flash and sound. If a bed shaker
(6) is connected, it will vibrate. A short press on the test button (7) repeats the last
indication. If nothing happens, see Troubleshooting.
1
Default signal pattern
When a transmitter is activated, the Portable receiver lights up a LED and begins to sound
and flash. If you have connected a bed shaker, it starts to vibrate with a certain pace. This is
called signal pattern. The transmitters determine the pattern, and the default is:
Transmitter
Activated source
Door transmitter
Push button transmitter
Telephone transmitter
Baby monitor
Smoke alarm
CO alarm
https://manual-hub.com/
2
Portable receiver
Visit LED
Sound
Flash
Green
Door chime
Yes
Green
Door chime
Yes
Yellow
Ring signal
Yes
Orange
Baby melody
Yes
Red
Fire horn
Yes
Orange/red
Emergency alert Yes
3
EN
Bed shaker
Vibration
Slow
Slow
Medium
Fast
Long
Long
5
Publicité
