Publicité
Press the OK button (2) to clear the fault codes.
Erase Codes
Please Turn Ignition ON with
Engine Off, Press OK key to
continue!
11.3 I/M readiness test
I/M refers to Inspection and Maintenance to comply with national emission standards. I/M shows
whether the vehicle's emission control systems are working correctly and whether inspection
and maintenance tests can be carried out.
After an error has been fixed, I/M can confirm the correctness of the error fixing.
Diagnostic Menu
Read Codes
Erase Codes
I/M Readiness
Data Stream
Evap System Test
Vehicle Information
54
Information has been cleared!
Since DTCs Were Cleared
This Drive Cycle
3/6
Erase Codes
Emission-Related Diagnostic
I/M Readiness
1/2
Publicité
