WIFILxxx
Smart LED bulb
Use
1. Download and install the app "Nedis SmartLife" from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app "Nedis SmartLife".
3. Create a new account or log in to your existing
account.
4. Tap "+" to add the device.
5. Select "Light bulb" from the list of products.
6. Screw in the smart LED bulb.
7. Switch on the power.
8. If the light does not flash: Switch the power to the
smart LED bulb on - off - on - off - on.
If the light flashes: Confirm in the app.
9. Confrm the Wi-Fi network and password.
10. Enter the device name.
Note: The device name will also be used by Amazon
Alexa and Google Home.
Safety
•
To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required.
•
Disconnect the product from the mains and other
equipment if a problem should occur.
•
Read the manual carefully before use. Keep the
manual for future reference.
•
Only use the device for its intended purposes.
Do not use the device for other purposes than
described in the manual.
•
Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
•
The device is suitable for indoor use only. Do not use
the device outdoors.
•
Do not expose the product to water or moisture.
•
Do not touch the device with wet hands.
•
Make sure that the voltage of the smart LED bulb is
compatible with the mains electricity of your country
before connecting it to the bulb holder.
•
Make sure that the base of the smart LED bulb
matches the bulb holder.
Cleaning and maintenance
Warning!
•
Do not use cleaning solvents or abrasives.
•
Do not clean the inside of the device.
•
Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
•
Clean the outside of the device using a soft, damp
cloth.
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support
2
English