Safety Notes; Symbol Description; Installation Instructions - Hansgrohe Axor Universal Accessories 42836 Série Mode D'emploi / Instructions De Montage

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
Intended use of the handle 42830XXX: The handle
is not a medical product, it is not intended for physi-
cally impaired persons, but only for general private
use.
Use only the handle for support, the remaining prod-
ucts are not intended to be used as supports.
Check the proper attachment and tight seating of the
installed products periodically (annually).

Installation Instructions

• Prior to installation, inspect the product for transport
damages.
After it has been installed, no transport or surface
damage will be honoured.
• Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels are
only suitable for concrete. For another wall construc-
tions the manufacturer's indications of the dowel
manufacturer have to be taken into account.
4
English

Symbol description

Assembly see page 35
Do not use silicone containing acetic acid!
Dimensions (see page 31)
i
Installation example (see page
52)
Installation example 42821000
(see page 34)
Spare parts (see page 54)
XXX = Colors
000 = chrome plated
820 = brushed nickel
Special accessories (order as an
extra, see page 57)
• Adapter #42870XXX
• cover cap set #42871XXX
• mounting kit #42841000
• cover (150 mm) #42890XXX
• cover (300 mm) #42891XXX
Cleaning (see enclosed brochure)
Cleaning 42819000
(see page 50)
With the excentric washer it is possible to
equalize tolerance of the drilling.