Home Skinovations Silk'n clear UE08WCP-105040SPA Notice D'utilisation page 15

Battery – Charging
- Indicator Light
(K Orange) does
not turn on when
connecting the
PLUG into the Base
Unit Socket
Applicator
temperature rises
during use
Ready Mode
Indicator I (Green) is
blinking
Ready/Treatment
Mode-Indicator (I
Green) does not lit
when pressing the
On/Off Switch
The Yellow System
Error – Indicator
Light (J Yellow) is
Blinking
The Orange Battery
– Charging and
Green Battery – Full
- Indicator Lights
are illuminated
alternately
The ADAPTOR is
not plugged in the
electrical outlet
The Adaptor is not
inserted properly
into the electrical
outlet and/or
the PLUG is not
inserted properly
into the Base Unit
Socket
The Applicator is
Broken
This is normal
The rechargeable
batteries are empty
Batteries are empty
Batteries are full
(L Green) indicator
lit when applicator
is placed in base
unit charger
Malfunction of the
Applicator
Malfunction of the
Adaptor
Malfunction of the
Applicator
Insert the Plug into the Base Unit Socket
Connect another appliance to the wall
socket to check if the electrical outlet is live
If the Applicator still does not charge,
contact your local Silk'n Customer Service
Center
Make sure the Applicator is inserted
properly into the electrical outlet and/
or Plug is inserted properly into the Base
Unit Socket
Contact your local Silk'n Customer Service
Center
No action is required
Charge the applicator
Charge the applicator
Press the On/Off Swith twice to switch
the applicator off and on again. If Ready/
Treatment Mode-Indicator (I Green)
does not lit again, contact your local Silk'n
Customer Service Center
Press the On/Off Switch twice to switch
the Applicator off and on again. If System
Error - Indicator Light (J Yellow) illuminates
again, contact your local Silk'n customer
Service center
Disconnect the Adaptor from the electrical
outlet, press the On/Off Switch twice to
switch the Applicator on and off again.
Connect the Adaptor to the wall socket,
If the problem persists, contact your local
Silk'n Customer Service Center
Press the On/Off Switch twice to switch the
Applicator off and on again. If the problem
persists, contact your local Silk'n Customer
Service Center
15