Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
> Before Start
> Part Names
MCACC
1
TV's remote controller
> Install
> Initial Setup
2
> Playback
Supplementary information |
Full Auto MCACC
Place the supplied speaker setup microphone in the listening position, measure the test
tones emitted by the speakers, then the unit automatically sets the optimum volume level for
each speaker, and the distance from the listening position. This also automatically adjusts
the equalizers for the speakers and enables correction of distortion caused by the acoustic
environment of the room.
Refer to "1. Full Auto MCACC" (
P18) in Initial Setup for details.
1. Switch the input on the TV to that assigned to the unit.
2. Press
on the remote controller to display the Home screen, then select MCACC with
the cursors on the remote controller and press ENTER.
3. Press ENTER on the remote controller in the next screen.
0 To cancel Full Auto MCACC partway through, disconnect the speaker setup microphone.
4. When Full Auto MCACC is complete, press
Advanced Setup
| Others
.
E
N
49
Publicité
Chapitres
Table des Matières
Dépannage
