Publicité
SPECIFICATION
― ―
Product Dimensions:
165 x 105 x 190mm
Net Weight:
0.71kg
Power:
500W
PARTS
― ―
1.
Temperature control dial
2.
Safety grill
3.
Tip-over switch
8 of 64 | English
Voltage:
220-240V~
Frequency:
50/60Hz
1
2
3
OPERATING INSTRUCTIONS
― ―
This heater features a tip-over switch on the bottom, so be sure to place the unit on a flat, even
surface.
Switching on and Setting Temperature
1.
Insert the plug into the power socket.
2.
Turn the temperature control dial until you hear a click – this will turn the unit on. Continue
turning the dial to your desired temperature. The temperature control dial acts as a
thermostat. Once the room has reached the desired temperature the unit will switch off.
Switching Off
1.
Turn the temperature control dial anticlockwise to 'OFF'.
2.
Remove the power plug, store the heater after the unit has cooled down.
CLEANING AND STORAGE
― ―
WARNING: ALWAYS TURN THE HEATER OFF, UNPLUG THE
POWER CORD FROM THE ELECTRICAL OUTLET AND ALLOW
THE APPLIANCE TO COMPLETELY COOL DOWN BEFORE
HANDLING OR CLEANING IT.
WARNING: ALLOW THE HEATER TO COOL DOWN FOR 2
HOURS (120 MINUTES) BEFORE CLEANING.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE HEATER, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS HEATER DAMAGE WILL OCCUR.
•
Do not attempt to clean the heater in any other way than
that detailed by the manufacturer.
•
Clean the exterior surface of the heater by wiping it with
a soft, damp cloth. Dry the heater with a soft clean cloth.
•
Clean the air inlet and outlet grills regularly with a
vacuum cleaner, using the brush attachment to avoid
English | 9 of 64
Publicité
