Publicité
Auto obstacle avoidance
This function is enabled by default. During auto image
correction, the projector will automatically detect and avoid
obstacles in the projected area, ensuring an unobstructed and
complete image. The image may zoom out based on the
positions and sizes of the obstacles.
You can enable or disable this function by pressing the se ings
bu on on the remote control and selecting Se ings >
Projector > Keystone > EasyView.
Auto screen alignment
This function is enabled by default. During auto image
correction, the projector will automatically detect the screen
(sold separately) and align the image with all four edges of the
screen.
You can enable or disable this function by pressing the se ings
bu on on the remote control and selecting Se ings >
Projector > Keystone > EasyFit.
Projection distance & screen dimensions
W
SD
Projection Screen
Determine the distance between the projector and the screen
according to the desired screen size.
Screen Dimensions
Projection Distance
(SD)
40"
60"
80"
100"
120"
Screen Dimensions (SD): The diagonal size of the projection screen (in inches).
Projection Distance (D): The distance between the front end of the projector
and the screen (in centimeters).
Screen Width (W): The width of the image projected on the wall (in centimeters).
Note: The values in the table above are for reference only. They may slightly
differ from the actual values. Please refer to the actual values.
D
Projection Screen
Screen Width
(D)
(W)
107 cm
89 cm
161 cm
133 cm
214 cm
177 cm
221 cm
268 cm
266 cm
322 cm
08
Publicité
