Leds And Pushbutton Actions Functioning - JRI Maxant Spy RF TH 06247D Notice D'utilisation

k)

Leds and pushbutton actions functioning

The green led is on 2'' when the measurement starts and then flashes each 1' in recording mode.
Specials functioning regarding the recorder using mode :
Device set up in storage mode
Pushbutton pressing
Mode
OFF
Starting measurements
Pushbutton
Delayed (date & time)
Immediately
Measuring
Device set up in transportation mode
Pushbutton pressing
Mode
Off
Starting measurements
Pushbutton
Delayed (date & time)
Immediately
Measuring
< 5"
-
Green led 2" = beginning of
measurements
-
-
Green led 10" = auto control
< 5"
-
Green led 2" = beginning of
measurements
-
Green led 10" = Top zone
17
5''> pressing <10''
The 2 leds are on and flash
at the same time.
-
-
-
-
5"<appui>10"
The 2 leds are on and flash at
the same time
.
-
The 2 leds are on and flash at
the same time
= Waiting for
starting measurements
The 2 LEDs are on and then
flash alternatively
= ending
measurements
The 2 LEDs are on and then
flash alternatively
= ending
measurements