Presentation; Display; Complementary Information; Installation - JRI Maxant Spy RF TH 06247D Notice D'utilisation

III. PRESENTATION
Alarm LED (red)
Working LED
(green)
Push button

Display

Sensors
a) Display
Recording mode
Overpassed
thresholds
indicators
Channel N°
b)

Complementary information

IV. INSTALLATION
a)

Installation recommandations

Place the devices at ~2m high and around 30 to 40cm from the ceiling to avoid obstacles and moving

persons.
If possible, place the Spy RF in central position regarding the Spy RF recorders.

Try to place them preferably at sight of each other .

On the wall, it is preferable to them aside by using the special bracket (ref 08512) of the catalog.

Place the antenna above the top the monitored unit (fridge, incubator, oven, cold rooms...),.

Never place the Spy RF horizontally.

If some difficulties persist, it is possible to use Spy Rf RelaY (repeaters) or to connect another Spy RF

ModeM to the Ethernet network (LAN).
Battery
trap door
Waiting mode
Non-programmed mode
Full memory. You must transfer the data to your PC.
Low battery. You must change the battery.
13
Wall-mounting bracket
Memory status
Radio signal
Measurement and
unit