Sanus Systems HTB4 Instructions D'installation
Liens rapides
EN
Thank you for choosing the Sanus Systems HTB4. The HTB4 stands are designed to
support satellite speakers weighing up to 1.8 kg (4 lbs) each.
Do not use this product for any purpose not explicitly specified by Sanus
Systems. Improper installation may cause property damage or personal injury.
If you do not understand these directions, or have doubts about the safety of
the installation, contact Sanus Systems Customer Service or call a qualified
contractor. Sanus Systems is not liable for damage or injury caused by incorrect
mounting, assembly, or use.
Gracias por optar por el HTB4 de Sanus Systems. Los pies HTB4 están diseñados para
ES
sostener altavoces satélite de hasta 1,8 kg de peso cada uno.
No utilice este producto para ningún fin que no sea explícitamente especificado
por Sanus Systems. Una instalación inadecuada puede provocar daños
materiales o lesiones personales. Si no entiende las instrucciones de montaje
o tiene alguna duda sobre la seguridad de la instalación, contacte con Sanus
Systems o llame a un operario cualificado. Sanus Systems no es responsable de
daños o lesiones causados por el montaje, ensamblaje o uso incorrectos.
FR
Merci d'avoir choisi le support HTB4 de Sanus Systems. Les supports HTB4 sont conçus
pour supporter des haut-parleurs satellite d'un poids maximum de 1,8 kg chacun.
N'utilisez pas ce produit à une fin non spécifiée expressément par Sanus
Systems. Une installation incorrecte peut entraîner des préjudices corporels
ou des dommages matériels. Si vous ne comprenez pas ces instructions ou si
vous avez des doutes quant à la sécurité de l'installation, veuillez contacter le
service clientèle de Sanus Systems ou un installateur qualifié. Sanus Systems
n'est pas responsable des dommages ou des préjudices causés par un montage,
un assemblage ou une utilisation incorrects.
Customer Service: 1-800-359-5520 • info@sanus.com • www.sanus.com
WARNING
ADVERTENCIA
ADVERTISSEmENT
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
HTB4
(6901-300047 <00>)
001256.eps
HTB4 - Full Assembly
Manuels Connexes pour Sanus Systems HTB4
Sommaire des Matières pour Sanus Systems HTB4
- Page 1 Sanus Systems is not liable for damage or injury caused by incorrect mounting, assembly, or use. Gracias por optar por el HTB4 de Sanus Systems. Los pies HTB4 están diseñados para sostener altavoces satélite de hasta 1,8 kg de peso cada uno.
- Page 2 Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts! WARNING This product contains small items that could be a choking hazard if swallowed.
- Page 3 [01] x 2 [02] x 2 [03] x 2 [04] x 4 [05] x 4 [06] x 10 [07] x 2 [08] x 2 [09] x 2 [10] x 2 [11] x 2 [12] x 2 [13] x 2 [14] x 2 M5 x 15mm M5 x 12mm 1/4-20 x 12mm...
- Page 4 [04] [06] [03] [06] [05] [01] [07] [09] [03] [06] [08] 6901-300047 <00>...
- Page 5 [02] [01] [13] [15] [12] [13] [17] [02] 6901-300047 <00>...
- Page 6 [15] [11] [02] [17], [18] [10] [16] [10] [14] [17], [18] 6901-300047 <00>...
- Page 7 CAuTION Disconnect the Speaker Wire from the receiver or amplifier when you route it through the Upper and Lower Pillar and out through the Base to avoid damage to the speakers, amplifier, or receiver. ADVERTENCIA Desconecte el cable del altavoz del receptor o el amplificador cuando lo introduzca a través del poste superior e inferior y lo saque a través de la base, a fin de evitar que se deterioren los altavoces, el receptor o el amplificador.
- Page 8 CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.