Battery Care - Numatic TTB-1620/100 Mode D'emploi

To ensure your machine remains at its maximum efficiency and prolong your battery life, please follow
the simple steps below:
Fig.43
Under normal daily usage:
Recharge batteries after each use regardless of machine operation time
Showing location of Viewing panel for charging-light sequence (fig 43).
Recharge the machine fully after its last use.
Do not leave the machine in a discharged state.
Under abnormal use; i.e. leaving the machine without charging
for a period of time - we advise that you
follow these steps:
If the machine will be standing unused for a period of 30 days
or more, then batteries must be fully charged and battery fuses
removed using the Maxi fuse-puller provided, prior to this period.
Batteries should be recharged every three months.
Charge fully the day before you start using the machine again.

Battery Care

Yellow:- Charging Normally, 23 hours MAX
Yellow Flashing:- Charging Finished, (Trickle Charging)
Green:- Fully Charged
Red:- Charging Stopped Automatically, 27 hours MAX
Remove Mains Supply
27