Electrolux ELFE7337AW Guide Rapide

Before you begin
• Double check that all shipping materials are removed from your new
dryer.
• Read the Use & Care manual to get familiar with your new dryer.
Care and Cleaning
• The dryer is equipped with a clamshell style LuxCareTM Lint Shield filter
which must be opened to remove lint collected during a drying cycle.
Press the OPEN button to clean the lint fi lter after every load. See your
Use & Care Manual for complete instructions on how to clean your
fi lter.
• A waxy build-up from fabric softener sheets may form on the lint fi lter
or moisture sensing bars. Clean the fi lter periodically with warm, soapy
water, and dry thoroughly before replacing.
Important Reminder: Regularly check the entire outdoor exhaust and
venting system and clean any lint build up.
Getting Started
Turn on your dryer
Press the POWER button to turn on your unit.
Select a Cycle
Turn the cycle selector in either direction or press the cycles
button (depending on your model) to scroll to the desired cycle.
ALLERGEN
Available on 500 & 600 series, for allergen reduction, not for
delicate items.
BULKY
Available on 300 & 400 series, for large loads and durable
fabrics.
HEAVY DUTY
For large loads and durable fabrics.
NORMAL (ECO FRIENDLY)
For everyday loads including cotton, linen or sheets. Select the
Dry Boost option if needed.
ACTIVEWEAR
Available on 500 & 600 series, for lightweight, synthetic, athletic
and stretch fabrics.
MIXED LOAD
Available on 500 & 600 series, for mixed fabric loads.
TOWELS
Available on 300, 500 & 600 series, for drying loads of towels.
FAST DRY
Dries small loads consisting of a few items in 15, 18, or 20
minutes depending on your dryer model.
DELICATES
For knit and delicate fabrics.
AIR DRY (no heat)
Available on 600 series, for small loads of delicate items.
TIME DRY
Various drying times and temperature settings can be selected.
INSTANT REFRESH
Available on 400, 500 & 600 series, uses steam to refresh
fabrics, remove odors and reduce static.
Select Cycle Setting
TEMP
Electrolux.com (877) 435-3287, 10200 David Taylor Drive
Charlotte, NC 28262, États-Unis
Electrolux.ca (800) 265-8352, 5855 Terry Fox Way
Mississauga, ON L5V 3E4
A Quick Guide to Getting Started
FAQs
What can I do to optimize the drying performance?
After ensuring your lint fi lter is clean, check to make sure
the cycle and settings selected are the right ones for your
load type. Avoid overloading your dryer as items need
room to tumble freely and use the DRY BOOST option to
increase the drying temperature for select drying cycles.
Is it normal for my dryer to make sounds or noises?
Some sounds are part of your dryer's normal operations.
You may hear the suspension rollers or exhaust system
moving air through the cycle. For gas models, you may
hear a clicking sound as the gas valve opens and closes
to control the gas fl ow. Check your Use & Care Manual
to learn more.
How do I add a forgotten item to the load?
To add an item to the dryer, press START/PAUSE, add the item, close the door and press START/PAUSE again to
resume the cycle.
Press the TEMP button
to select the desired
dry temperature
setting.
SANITIZE
Available on 400,
500 & 600 series, for
removing harmful
bacteria from your
clothing or other
items. Check fabric
care labels to prevent
damage.
*Your model may look slightly diff erent. See your Use & Care Manual for more information on
HIGH
each cycle, setting & option.
For most cotton fabrics.
NORMAL
For wrinkle free, easy
care, lightweight fabrics and bulky loads.
LOW
For delicate fabrics.
ECO DRY (NO HEAT)
Use with a time dry cycle to dry items containing feathers,
down, foam rubber, plastics or rubber-like materials.
DRY LEVEL
Select to choose the desired dryness level. The dryness levels
include MAX (on select models), high, normal, low, and damp.
Select damp for items you wish to partially dry before hanging
or ironing. Not all dryness levels are available with every cycle.
DRY TIME
Press the DRY TIME button to choose a dry time of 30–75
minutes for a manual dry time cycle.
AUTO
Automatically dries at the selected temperature to the desired
dryness level.
Select Options
Press the OPTIONS button, turn the cycle selector in either
direction to scroll to the desired option then press SELECT to
set.
PERFECT STEAM™
Available on 400, 500 & 600 series, injects steam prior to cool
down to reduce wrinkles and static.
ANTI-STATIC
Available on 500 & 600 series, injects steam just prior to cycle
end to reduce static.
Peace of Mind & Protection
Register to get the most out of your appliance. Take the fi rst step to becoming a part of the Electrolux family
and discover more benefi ts by registering your appliance. You can easily register via the QR code on your
appliance or registration card, or by visiting Electrolux.com/register.
Cycle settings and options revert to default
settings each time the dryer is used.
The cycle selector, temperature, and dryness
level will be set to normal.
See electrolux.com for more FAQs
EXTENDED TUMBLE
Select to extend tumble time for 30 minutes without heat if the
dried load won't be promptly removed at cycle end.
DRUM LIGHT
Select to enable or disable the drum light option.
DRY BOOST
Increases the drying eff ectiveness for heavier fabrics or bulky
loads by increasing the drying temperature by less than 20°F
(>1°C). (Varies based on cycle selection).
WRINKLE RELEASE
Select to help prevent wrinkles and tangling by tumbling the dry
load without heat for 5 minutes out of every 10 minutes.
CONTROL LOCK
Select to lock the controls between cycles Repeat to
deactivate.
DELAY TIME
Use delay time to delay the start of the drying cycle to a time
convenient to your schedule or during off -peak energy hours.
Start Load
Close the door and press the START/PAUSE button.
Learn More
We recommend familiarizing yourself with product
features and terminology in your Use & Care Manual.