LENCO PDR-015 Mode D'emploi page 8

•
Stations close or can no longer be received (In the station
list, invalid stations are indicated with a question mark in
front of their name).
•
If reception was not good for the original scan (for example
the antenna was not up), this may result in an empty or
incomplete list of available stations.
•
If you have poor reception of some stations causing the
audio to break up, you may wish to list only stations with
good signal strength.
To do a full scan Select Menu > Full scan.
Once a scan is complete, the radio returns to playing the
previously-selected station or first station on the station list.
Now playing information
While a station is playing, the screen shows its name and DLS
(Dynamic Label Segment) information transmitted by the radio
station such as program name, track title and contact details.
Long DLS info, over 16 characters will scroll across the display.
When you short press MENU each time, the next set of
information is displayed, cycling through:
DLS text (default), signal strength, ensemble name, channel
number/region, channel number/frequency, signal error rate,
bit rate/DAB variant, codec/DAB variant, time and date.
6. Change Station (FM)
8