Publicité
Playing on the Micro Player™ Pro
1. Remove the battery cover located on the back of the console.
2. Insert 4 AA batteries and replace the battery cover.
3. If you do not want to use batteries, gently insert the USB-C® end of a USB-C® cable (not included) into the
power port (5V IN) located on the back of the console. Gently insert the other end of the cable into a powered
USB port. When using this option, you do not need to add batteries.
4. Move the power switch from ( ) to ( ).
How to insert and remove batteries
IMPORTANT: Use high quality alkaline batteries for longer playing times.
Battery Information
Leakage of battery acid can cause personal injury as well as damage to this product. If battery leakage occurs,
thoroughly wash the a ected skin and clothes. Keep battery acid away from your eyes and mouth. Leaking
batteries may make popping sounds.
• Batteries should be installed and replaced only by an adult.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Do not mix used and new batteries (replace all batteries at the same time).
• Adapters used with the device are to be regularly examined for damage to the cord, plug, enclosure and other
parts, and in the event of damage, it shall not be used until the damage has been repaired.
• Misuse of transformer can cause electrical shock.
• Devices may not be compatible with rechargeable batteries.
• Do not mix di erent brands of batteries.
• We do not recommend using batteries labeled "Heavy Duty", "General Use", "Zinc Chloride" or "Zinc Carbon" .
• Do not leave batteries in the controller for long periods of non-use.
• Remove batteries and store them in a cool, dry place when not in use.
2
Publicité
