Publicité
A
2. INSTALLATION
HDMI
1
VGA
2
SPK
3
DC
4
2.1 Connection of signal cable
Before connecting your monitor and PC with signal cable, please turn off your
monitor and computer. Connect the HDMI or VGA cable into each ports from
the monitor to the computer, and lock it with two fixed screw for ensured
grounding Finally, please insert another end of signal cable to the VGA/HDMI
signal input jack of monitor and lock it with fixed screw.
2.2 Connection of power cord
First, insert one end of power cord cable into the power input jack of monitor,
and another end into power outlet.
2.3 Connection of Audio jack
Insert the audio cord cable into the audio input jack of the monitor and
computer.
8
2.4 Power on
Turn on the monitor and computer, and then indicator will light green (or
blue) when the screen is under normal condition. Please check to see if there
is anything wrong with the connection of video signal cable if the indicator
light is red.
2.5 Self-inspection
If the monitor detects no signal It will enter power saving mode after a certain
time, the indicator will turn red.
The screen will restore to normal
display once receiving video signal.
2.6 Image Adjustment
Please adjust the image according to your need; please refer to the
"Operation" in Section Three.
A
9
Publicité
