Publicité
35.Before carrying out Decommissioning procedure, it is essential that the
technician is completely familiar with the equipment and all its detail. It is
recommended good practice that all refrigerants are recovered safely.
Prior to the task being carried out, an oil and refrigerant sample shall be
taken in case analysis is required prior to re-use of recovered refrigerant. It
is essential that electrical power is available before the task is commenced.
36.When removing refrigerant from a system, either for servicing or
decommissioning, it is recommended good practice that all refrigerants are
removed safely.
37.The recovery equipment shall be in good working order with a set of
instructions concerning the equipment that is at hand and shall be suitable
for the recovery of all appropriate refrigerants including, when applicable,
FLAMMABLE REFRIGERANTS
38.The recovered refrigerant shall be returned to the refrigerant supplier in
the correct recovery cylinder, and the relevant waste transfer note
arranged. Do not mix refrigerants inrecovery units and especially not in
cylinders.
39.The appliance shall not be instaled in public corridors or lobbies.
Transportation and Placement
Transportation：
1. Take out packing and clean all the cabinet using warm water together
with 5% of neutral soap then dry it with a soft-cloth; for the glass parts only
use specific products, avoiding the use of water which can leave on the
glasses limestone residues.
2. Keep a distance from the wall of 10 cm at least. Please level the unit
settling the adjustable feet.
3. Cabinet must be installed on a perfectly even surface, far away from any
heat source included sun rays.
4. Do not install the unit in open places and do not expose it to rain.
- 5 -
Publicité
