Télécharger Imprimer la page

Meec tools 014405 Mode D'emploi page 17

Publicité

lack experience or
knowledge, if they are
supervised or receive
instructions concerning the
safe use of the product and
understand the risks involved
with its use. Do not allow
children to play with the
product. Do not allow
children to clean or maintain
the product without
supervision.
• Note that the heater
element will still be hot after
the product is switched off
– risk of burn injury.
IMPORTANT:
It is not possible to remove spots of
hotmelt glue from clothes.
Wear safety glasses.
Allow the product to cool upright in its
holder after use.
Pull out the plug during long pauses in
the work.
SYMBOLS
The following symbols can be of importance
for how you should use your power tool. Make
sure you understand the symbols and their
significance.
Read the instructions.
Approved in accordance with the
relevant EU directives.
This product has a safety class
II rating. This means it is fitted
with extra or double insulation.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage
Nominal input power
Heating effect
Temperature range
Safety class
Protection rating
Cord length
Glue stick
Glue sticks sold separately in Jula's department
stores and at www.jula.com.
DESCRIPTION
PARTS
1.
Opening
2.
Power cord
3.
Trigger
4.
Support
5.
Nozzle
FIG. 1
INTENDED USE
The product is a hotmelt glue gun intended for
gluing wood, plastic, foam plastic, textile, tiles
EN
230 V ~ 50 Hz
25 W
10 – 15 g/min
170 – 190°C
II
IP20
1.3 m
ø 11.2 mm
2

Publicité

loading