Technical Data - Heitronic Pronto Manuel D'installation

. Malfunctions
Luminaire does not switch on

Light switched on at the switch?

Check the connected lines

. Technical data

Article Type
500575 Ø 280 mm
500638 Ø 330 mm
500573 280 mm*280 mm
500640 330 mm*330 mm
500573/500575 contain a light source of energy efficiency class E.
500638/500640 contain a light source of energy efficiency class D.
. Care

First disconnect the entire product from the power supply and allow it to cool down before carrying out
any cleaning or maintenance work on the product.

Clean the product regularly - only with a slightly damp, soft and lint-free cloth.
. Disposal

Electronic waste equipment must be taken to public collection centres and must not be disposed of as
household waste. For this purpose, collection points are available from retailers or waste disposal
companies that accept operating devices and light sources free of charge. In this way, raw materials can
be conserved and reused.
LDBS Lichtdienst GmbH ǀ Chemnitzer Straße 8 ǀ 14612 Falkensee ǀ
The area in front of the bayonet lock is NOT an installation area.
Therefore, no wires may be routed there. The mechanical movement
during closing could damage the wires.
Connection
230 V ~, 50 Hz 18 W, 1600 lm, 3000 K
230 V ~, 50 Hz 24 W, 2160 lm, 3000 K
230 V ~, 50 Hz 18 W, 1600 lm, 3000 K
230 V ~, 50 Hz 24 W, 2160 lm, 3000 K
Protection
LED
Type
IP 54
IP 54
IP 54
IP 54
www.HEITRONIC.de | info@ldbs.de
Protection
Class
II
II
II
II
4 / 8 12/24