Charging Battery - Bca Link Mini Manuel D'utilisation

Masquer les pouces Voir aussi pour Link Mini:
Table des Matières

Charging battery

Connect the radio to a power outlet using only the included cable and
USB power adapter. Third-party cables are not compatible with this
product and should not be used under any circumstances. Insert the
cable into the radio's charging port until you hear a "click". A full recharge
can take up to six hours. The light next to the USB port will be red when
the radio is charging. The light next to the USB port will turn green when
the radio is fully charged.
Remaining Battery Power Display
This radio has a Battery Level Meter
level. The greater the number of bars visible, the stronger the battery level.
display indicating your battery should be recharged.
WARNING! To avoid the risk of personal injury or property damage from
product.
Connecting Belt Clip
Connect the Belt Clip to the radio by sliding the clip into the slot on the back
of the radio until it snaps into place.
Connecting the Webbing Clip & Strap
Connect the Webbing Clip to any webbing as shown in the image below.
Connect the Webbing Clip to the radio by sliding the clip into the slot on the
back of the radio until it snaps into place.
that shows the battery power
4
Table des Matières
loading

Table des Matières