Publicité
I - S U P
→ Installation of the FCS II Fins (shortboard)
>
Clip the fins into the box, first inserting the front part of the fin into the groove and then tilting
its rear part into the box until it clicks.
→ Deflation
ANY QUESTIONS ? Contact our Team
gong-galaxy.com/aide-contact/
❶
To deflate the board, open the valve cover and
press the button to turn it down to deflate.
Do not be surprised by the air that escapes
from the valve. Do not deflate your board on
the water.
❷
Remove your fin. Roll up your board carefully
starting from the back of the board, pad towards
the inside. Do not tighten too close to the fin
box to avoid generating tension.
- 16
EN
Publicité
