Dario tools CMB.515750 Mode D'emploi page 32

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

17. Avoid unintentional starting. Do not
carry plugged-in tool with finger on
the switch. Be sure that the tool is
switched off before plugging in.
18. Outdoor use extension cords. When
tool is use outdoors, use only
extension cords intended for use
outdoors and so marked.
19. Stay alert. Watch what you are
doing. Use common sense. Do not
operate tool when you are tired.
20. Check damaged parts. Before further
use of the tool, a guard or other part
that is damaged should be carefully
checked to determine that it will
operate properly and perform its
intended function. Check for
alignment of moving parts, binding of
moving parts, breakage of parts,
mounting and any other conditions
that may affect its operation. A guard
or other part that is damaged should
be properly repaired or replaced by
an authorized service center unless
otherwise indicated elsewhere in the
instruction manual. Do not use tool if
switch does not turn it on and off.
21. WARNING! The use of any other
accessory or attachment other than
recommended in the instruction
manual may present a risk of
personal injury.
22. Have your tool repaired by an expert.
This electric appliance is built in
accordance with the relevant safety
rules. Repair of electric appliances
must only be carried out by experts
otherwise it may cause considerable
danger for the user.
STORE THESE INSTRUCTIONS FOR
FUTURE REFERENCE!

Publicité

Table des Matières
loading

Produits Connexes pour Dario tools CMB.515750

Table des Matières