Capture Mode - Kodak SCANZA Manuel De L'utilisateur

7. CAPTURE MODE

1. Press the soft function key under
the Capture icon on the screen
to go to the capture mode. Your
loaded image will appear on the
LCD screen. The status bar on
the top, indicating the active
mode and settings, will disappear
after 15 seconds. Press any of the
function keys to bring back the
status bar.
• The underlined text indicates the highlighted setting. The highlighted
setting can be accessed by pressing the Select button.
• By selecting color adjustment, you will be taken to the settings menu to
adjust the color of the photo.
• By selecting Info, you will be taken to a screen that tells you which adapters
are needed for the current mode. If you wish to change the film type, you
will need to do so manually in the Film Type settings.
2. Press the hard Capture button (camera icon) to capture and save an image.
The screen will display "Saving."
Note: An ERROR message will
appear if the SD™ card (not
included)
is full or if no memory card is
inserted into the unit.
Note: Pressing the soft keys will
activate the status bar, where you
can select color adjustment or
info. To return to capture mode,
select the camera icon on the status bar.
3. Press any function button to bring up the status bar at the top of the screen.
EN | 17