Télécharger Imprimer la page

Taurus Alpatec MG10 Mode D'emploi page 15

Publicité

- 4.2 Cold water: Press button
- 4.3 Ice: Pull the ice drawer out and take ice with
the ice scoop
SET TIMER:
- You can set the clock to automatically turn on
and turn off time via following steps:
SETTING THE CLOCK:
- Long press on the
figures at the indicator area is Illuminated
then press the
hour,and again
the minute,after the right time is set,the time will
flash for 5seconds,then locate.
SETTING THE TIMER FOR THE ICE MAKING
FUNCTION:
- A1, Long press on the
clock is illuminated,
- A2. then short presses on the
till the indicator
- A3. when the first two digits are illuminated,
press the
button to change the hour,
- A4 after it is set, with a short push on the
button again, the last two digits will
illuminate, press the
change the minutes.
- A5. When you are finished and the figures are
not illuminated, long press on the
button till indicator
UNSETTING THE TIMER FOR THE ICE MAKER
FUNCTION:
- B1, Long press on the
clock is illuminated,
- B2. then short press on the
the indicator
and
All manuals and user guides at all-guides.com
directly
button till the
button to change the
and
,to change
button till the
button
and
appear,
button again to
is on.
button till the
button till
appear,
- B3. when the first two digits are illuminated,
press the
button to change the hour,
- B4, After it is set,with a short push on the
button again,the last two digits will
illuminate,press the
change the minute.
- B5. After the setting is finished and the figures
are not illuminated, long press on the
button till indicator
SETTING THE TIMER FOR THE HOT WATER
FUNCTION,
- C1. Long press on the
clock is illuminated.
- C2. Short press on the
indicator HOT and
- C3. When the first two digits are illuminated,
press the
button to change the hour.
- C4. When it is set, short push the
button again, the last two digits will shine, press
the
button again to change the minute.
- C5. After the settings are finished and the fig-
ures stop are not illuminated, long press on the
button till indicator
UNSETTING THE TIMER FOR THE HOT WA-
TER FUNCTION:
- D1, Long press on the
clock is illuminated,
- D2. Short press on the
indicator
and
- D3. When the first two digits are illuminated,
press the
button to change the hour,
- D4. After it is set, short push on the
button again, the last two digits illuminate, press
button again to
is on.
button till the
button until the
appear.
is on
button till the
button till the
appear,

Publicité

loading