Symbols Used In This Manual - Varan XM-1010 Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

while operationg power tools may result in serious personal injury.

•

Use safety equipment.Always wear eye protection.Safety equipment such as dust mask,non-skid

safety shoes,hard hat,or hearing protection used for appropriate conditions will reduce personal

injuries.

•

Avoid accidental starting.Be sure switch is off before plugging in.Plugging in tools that have the

switch on invites accidents.

•

Remove adjusting keys or switches before turning the tool on. A wrench or a key that is left attached

to a rotating part of the tool may result in personal injury.

•

Do not overreach. Keep a proper footing and balance at all times. Proper footing and balance

enables better control of the tool in unexpected situations.

•

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

TOOL USE AND CARE

•

Do not force tool. Use the correct tool for your application.The correct tool will do the job better and

safer at the rate for which it is designed.

•

Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch

is dangerous and must be repaired.

•

Disconnect the plug from the power source before making any adjustments, changing accessories, or

storing the tool. Such as preventive safety measures reduce the risk of starting the tool accidentally.

•

Store idle tools out of reach of children and do not allow persons unfamiliar with the power tool or

theses instructions to operate the power tool. Tools are dangerous in the hands of untrained users.

•

Maintain tools with care. Properly maintained tools are less likely to bind and are easier to control.

•

Check for misalignment or bindling of moving parts, breakage of parts, and any other condition that

may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are

caused by poorly maintained tools.

•

Use the power tool, accessories and blades etc.,in accordance with these instructions and in the

manner intended for the particular type of power tool, taking into account the working conditions

and the work to be performed. Use of the power tool for operations different from those intended

could result in a hazardous situation

SERVICE

Have your tool serviced by a qualified repair person using only identical replacement parts.This will ensure

that the safety of the power tool is maintained.

Warning-To reduce the risk of injury, user must read instruction manual.