Varan XM-1010 Manuel D'utilisation page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LONG-REACH GRINDER MACHINE
For your personal safety
Read and Understand before Using
Save these instructions for future reference
GENERAL SAFETY RULES
WARNING
!
Read and understand all insturctions.Failure to follow all instructions listed below,may result in
electric shock,fire and / or serious personal injury. The term "power tool" in all of the warnings listed below
refers to your mains-operated ( corded) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
Keep your work area clean and well lit.
Cluttered worksites and dark areas invite accidents.
Do not operate power toos in explosive atmospheres, such as in the presence of flammable liquid,
gases,or dust. Power tools create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause
you to lose control.
ELECTRICAL SAFETY
Grounded tools must be plugged into an outlet properly installed and grounded in accordance with
all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not
use any adaptor plugs. Check with a qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the tools should electrically malfunction or break down, grounding provides
a low resistance path to carry electricity away from the user.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is grounded.
Don't expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
Don't abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord
away from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of electric shock.
When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W". These
cords are rated for outdoor use and reduce the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use tool while tired or under the influence of drugs,alcohol.or medication.A moment of inattention
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
XM-1010
XM-1010
T: 00352/26908036 – F: 00352/26908040

Publicité

Table des Matières
loading

Produits Connexes pour Varan XM-1010

Table des Matières