Publicité
1.3. LED indicator
1. Red light is always on when charging, it turns off when the battery is full
or the charging line is not connected. If the red light flashes, the battery
may be not applied or not applied appropriately.
2. Regular blue light indicates that all connections are in good condition.
3. Green light flashes when under 2.4G connection.
4. Green & blue lights flash synchronously when under HID connection.
1.4. Buzzer description
Sound type
1 time long beep (low first, high after )
1 time long beep (high first, low after)
1 time short beep (low)
1 time short beep (low first, high after)
1 time short beep (high first, low after)
3 times short beep (low)
5 times short beep (low)
and stop scanning
2 times short beep(low)
2 times short beep(high)
2. Restore factory defaults
Factory default
Description
Scanner on
Scanner off
Scan code or pair receiver or
wireless connected successfully
Save scanning data in storage
Scan setting code
2.4G send data fail or cache
is full
Power off
2.4G disconnect
Scan the Setting code which
does not work
9
Publicité
