Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
- The device is not suited for outdoor use: it must be installed in a specific protected dry and
aerated space.
- The instrument produces heat during normal operation. Make sure that the installation of
other equipment near the instrument does not hamper the correct air flow and prevent the
necessary instrument cooling.
- Do not use the device to power inductive loads (motors, fans, ..)
- Use cables with appropriate section.
- Protect cables from any possible damage.
- Protect the supply circuits using fuses sized as to the loads connected.
NB: Do not connect more than 25W lighting load to each single channel.
For control of higher loads, see "CONNECTING CHANNELS IN PARALLEL"
IMPORTANT:
- The installation of this device must be carried out by specialized technicians.
- In case of battery charger's misuse, the guarantee falls off and the manufacturer
declines all responsibility for damages to people and things.
- This device is not suitable for LED-spotlights with integrated regulator.
GB
GB
9
Publicité
Table des Matières
