Connecting The Power Cord - Secret Lab Magnus Pro Instructions D'assemblage

ASSEMBLY GUIDE

Connecting the Power Cord

Plug the Power Cord into the
socket located at the bottom of
the Left Motorized Leg Column.
Plug your desk into a 100V - 240V outlet.
Calibrating your Desk
Note: Your Motorized Leg Columns
have been lubricated to maintain
smooth operation. Some residue
is expected to be seen on the
Leg Columns after a few cycles.
Slide the Standby Switch to the right to
turn the Control Panel on. Press and hold
the button. The display will show "
Do not release the button until a beep is
heard. The calibration process is completed.
WARNING: Do not use the Secretlab MAGNUS Pro
until all steps and calibration have been completed.
".
Standby Switch
(Off Position)
Standby Switch
(On Position)
8