Publicité
Assembly Instruction
4 x 16mm screw
With the car body's back
side up, the left foot pedal
stuck down into the slot.
The hole is on the
right side of the car
Insert the assembled
T-shaded tube into the body
as shown.
08
Insert tube cover into the
T-shaped tube on both
sides.
5 x 30mm bolt
Fix the T-shaded tube and
the body using the bolt and
tighten with the nut.
Put the plush cover on the
body, and put the T-shaded
tube through the hole of the
plush head.
4 x 10mm screw
Put the handle sleeve on the
the handle bar and fix the
handle sleeve with screw.
Two holes are on the right
side of the car head
Insert the handle bar into
the T-shaped tube from the
right and align the holes.
4 x 10mm screw
Turn 180° counterclockwise
in the direction shown, align
the hole, and fix the handle
bar with screws.
09
Publicité
