First Installation - LEXIBOOK DMPTV1FR Mode D'emploi

WARNING: In order to get the best TV reception, it is recommended to use a roof
antenna. If you cannot use a roof antenna, use the antenna provided with the
product, placing it near or outside a window.
Mains connection
Do not connect your mini TV to the mains supply before finishing all other
connections. Insert the plug into a wall outlet (AC 220-240V~50Hz) close to the unit.
Note: The socket-outlet shall be installed near the equipment and shall be easily
accessible.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur, unplug
the AC / DC adapter from the mains socket and plug it back in.
This section describes how to set up your mini TV when using it for the first time.
When you have done all the connections, press the POWER ON/OFF key located on
the top of the TV to switch it on, then follow the on screen instructions to complete
the first settings.
OSD language setup
1. Press >,then use the CH+ and CH- keys to select a language.
2. Press Enter to confirm.
Country (area) setup
Select the country where the unit will be used.
1. Press the CH- key to select "Area", then press >.
2. Use the CH+ and CH- keys to select a country and press Enter to confirm.
Automatic channel search
1. Once you have selected the OSD language and the country, press Enter to
launch the automatic TV and radio channels search.
2. Use the < and > keys to select "Yes" and press Enter.
3. The unit will search for TV and radio channels available in your country and store
them automatically in the database.
Note: If the mini TV does not find any channel, "Database empty" will be displayed
on the screen.
Note: The mini TV is not compatible with radio channels in AC3 format.
26

FIRST INSTALLATION