Installation - LEXIBOOK DMPTV1FR Mode D'emploi

Masquer les pouces Voir aussi pour DMPTV1FR:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Battery installation
1. The first time you use the remote control, remove the
battery tab located at the rear of the unit.
2. Open the battery compartment cover by pressing the
unlock switch to the right and then sliding the battery
holder out.
3. Insert 1 lithium CR2025 3V
as illustrated and slide the battery cover in until it clicks
firmly into place.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed
from the product before being charged. Rechargeable batteries are only to be charged under adult
supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries
of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the
correct polarity. Exhausted batteries are to be removed from the product. The supply terminals are
not to be short circuited. Do not throw batteries into a fire. Remove the batteries if you are not going
to use the product for a long period of time.
WARNING: Malfunction or loss of memory may be caused by strong frequency interference
or electrostatic discharge. Should any abnormal function occur, remove the battery and insert
it again.
Using the remote control
• When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light
shines on the remote sensor of the unit, the remote operation may be unstable.
• When the battery becomes weak, the operating distance of the remote control reduces
significantly and you need to replace the battery.
Unpacking the device
When unpacking, ensure that the following elements are included:
1 x mini TV video player
1 x remote control
1 x CR2025 lithium type battery
1 x AC/DC adapter
1 x portable antenna
1 x instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are
not part of this product and should be discarded.
Note: Before using this product for the first time, remove the static label on the LCD
screen.
Setting up the Mini TV
Place the unit on a sturdy, horizontal, vibration-free surface. The product must not be
subjected to vibrations or shocks. Please observe the conditions in the safety
instructions.
To operate the TV, you can use the keys on the top of the LCD screen, or the remote
control's keys. Use the input and output connections on the right and left sides of the
TV to connect other devices to the unit.
Antenna connection
Connect your outdoor antenna or the portable antenna provided to the antenna socket
located on the left side of the unit.
type battery (included)

INSTALLATION

25

Publicité

Table des Matières
loading

Table des Matières