Télécharger Imprimer la page

Eaton Metalux HBL Série Instructions D'installation

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

ADF140674
Installation Instructions – HBL Wireguard
Instructions d'installation - Écran de protection HBL
Instrucciones de instalación del protector HBL
IMPORTANT: Read carefully before installing fixture. Retain
for future reference.
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Cooper Lighting assumes no responsibility for claims
brought about by improper or careless installation or
handling of this product.
ATTENTION
Receiving Department: Note actual fixture description
of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly
with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material,
complete with original packing must be retained.
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
NOTICE
Green ground screw provided in proper location. Do not
relocate.
NOTICE
Lamps contain mercury, dispose according to local, state,
or federal laws.
NOTICE
If supply wires are located within 3 inches of ballast, use
wire rated for at least 90°C (194°F).
NOTICE
Minimum 90°C supply conductors.
Brand Logo
reversed out of
black
INS #
INS #

Publicité

loading

Sommaire des Matières pour Eaton Metalux HBL Série

  • Page 1 Brand Logo reversed out of black INS # INS # ADF140674 Installation Instructions – HBL Wireguard Instructions d’installation - Écran de protection HBL Instrucciones de instalación del protector HBL IMPORTANT: Read carefully before installing fixture. Retain WARNING for future reference. Risk of Fire and Electric Shock. If not qualified, consult an electrician.
  • Page 2 K.O. (Figure 2.). Repeat steps 2 to 4 for opposite side (Figure 4.). Install thumb screw to clip (Figure 2.). K.O. Figure 2. Figure 1. Figure 3. Figure 4. Installation Instructions – HBL Wireguard 0590-F037 ADF140674 www.eaton.com...
  • Page 3: Important

    Les bords peuvent être coupants. Manipulez avec soin. MISE EN GARDE Risque de brûlures. Mettez l’alimentation électrique hors tension et laissez refroidir le luminaire avant de le manipuler ou de changer l’ampoule. Instructions d’installation - Écran de protection HBL 0590-F037 ADF140674 www.eaton.com...
  • Page 4 (Figure 2.). (Figure 3.). Répétez les étapes 2 à 4 pour l'autre côté (Figure 4). Défonçable. Figure 1. Figure 2. Figure 3. Figure 4. Instructions d’installation - Écran de protection HBL 0590-F037 ADF140674 www.eaton.com...
  • Page 5 Los bordes pueden ser cortantes. Manipule con cuidado. PRECAUCIÓN Riesgo de quemadura. Desconecte la alimentación y deje que la luminaria se enfríe antes de cambiar la bombilla o manipular la luminaria. Instrucciones de instalación del protector HBL 0590-F037 ADF140674 www.eaton.com...
  • Page 6 Repita los pasos 2 a 4 para el lateral opuesto (Figura 2.). (Figura 4.). Expulsor Figura 1. Figura 2. Figura 3. Figura 4. Instrucciones de instalación del protector HBL 0590-F037 ADF140674 www.eaton.com...
  • Page 8 All trademarks are property Eaton’s Cooper Lighting Business of their respective owners. 1121 Highway 74 South Peachtree City, GA 30269 Eaton est une marque de commerce Cooperlighting.com déposée. Toutes les autres marques de commerce sont la propriété de leur © 2014 Eaton propriétaire respectif.

Ce manuel est également adapté pour:

Metalux hbl454t5Metalux hbl654ht5upll5