Publicité
Les langues disponibles
Les langues disponibles
STEP 4
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
Carefully turn the unit over on its front side.
Assure the unit is square. Distance from corner to corner must be equal.
Position back panel as shown. Flush bottom edge of back panel with bottom edge of bottom. Align
squarely and nail straight into back edges as shown.
"Raw Surface"
systembuild.com
(x40)
BACK
PNL
Assure unit is square. Distance from
corner to corner must be equal.
11
You
Tube
Publicité
