Hisense RF225C3CSEI Manuel D'utilisation page 21

Display controls
On the Super Cool Function, when you touch the
"Eco" button, Eco function will be activated, and
"Super Cool" mode will be off.
You can touch the "Freezer" button to activate the
mode to control the freezer temperature. When
you press the button continuously, the
temperature will be set in the following sequence.
Press and hold the button for 3 seconds, the icon
" " will be illuminated, the freezer temperature
setting will display -24°C.
Super Freeze can quickly lower the temperature
and freeze your food faster than usual. This can
retain more of the vitamins and nutrition in fresh
food and keep your food longer.
Super Freeze automatically switches off after 52
hours, and the freezer temperature setting will
revert back to the previous setting.
When the Super Freeze function is on, you can
touch "Freezer" to switch off the Super Freeze
function.
The Super Freeze is used to perform pre-
freezing and fast freezing in sequence of Freezer
compartment. This function accelerates the
freezing of fresh food and,at the same time,
protects foodstuffs already stored from
undesirable warming.
To freeze fresh food activate
the Super Freeze function at
least 24 hours before placing the
food to complete pre-freezing
On the Super Freezer Function, when you touch
the "Eco" button, Eco function will be activated,
and "Super Freezer" mode will be off.
When the Child Lock is off,you can press the
"150ml"or "500ml" option to choose the volume of
water to be dispensed,and press the "Continuous"
button will activate the continuous water mode.If
you choose the function of "150ml",the "
be illuminated, choose the fuction of "500ml" the
" " icon will be illuminated,and the "
be illuminated when
chosen.
" icon will
" icon will
"Continuous" function is
After using "150ml " or "500ml " to fetch water,it will
automatically switch to the continuous water
fetching function in 30 seconds .
During the process of fetching water, it is forbidden
to switch the three outlet modes of 150ml, 500ml
and Contunuous. It is necessary to release the
water intake switch before it can be operated.
Switch Temperature Unit
In the unlocked state, press
between Celsius and Fahrenheit units. The default
state is Fahrenheit display.
You can touch this button to turn Energy Save
mode on and off. When you turn Energy Save on,
the Eco icon " " lights.
The temperature of the fridge is automatically
switched to 6°C and the freezer to -17°C.
If Energy Save is off, the icon" " will go off and the
temperature setting will revert back to the
previous setting.
The first time the power is switched on and the
water enters the filter, the filter state is
calculated at 99%. When the water filter state
drops to 15%, the icon "
state reaches 10%, the icon "
user needs to replace the filter and long press
the Energy Save Button for 3 seconds to reset
the water filter state.The filter state will then be
re-calculated to 99%.
Demo mode is for store display,and it
prevents the refrigerator from generating
cool air. In this Cooling off Mode, the
refrigerator may seem like it is working but it
will not make cool air. The indicators on the
control panel will show "OF OF". To cancel
this mode, press and hold
"Alarm" and "°F/°C" keys at the same time for 3
seconds and the buzzer will make a long
sound.
button to switch
" is lit. When the filter
" will flash, The
19