IMPORTANT: VENDOR REPRESENTS, WARRANTS AND AGREES THAT LABELING,
DESIGN, PACKAGING, SPECIFICATIONS SHALL COMPLY IN ALL RESPECTS WITH ALL
APPLICABLE LAWS AND STANDARDS.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
This winter vehicle shelter is specifically designed to protect the vehicle against weather conditions
during winter months. This unit must be assembled in accordance with the assembly instructions
provided. During severe winter conditions, an excessive accumulation of snow or ice on the canopy
roof may pose a safety concern. Under such conditions, accumulations of snow or ice must be
removed from the exterior of the shelter as there may be a weight overload on the canopy, which
could affect the unit's structural integrity. This shelter must be properly secured to avoid movement
and/or subsequent damage. There are numerous methods available to the owner. Please obtain
advice at your point of purchase on which method of anchoring is most suitable for your location.
WARNING
Keep all heat sources and flame away from this shelter. This shelter is meant for vehicle storage
only and should not be used as a shelter for personal and/or public gatherings. Never allow snow or
ice buildup on the roof. Remove ice and snow with a broom or non-sharp snow removal tool.
Always from the outside of the structure.
Do not walk on the top of the car shelter and be sure to clean the top of the car shelter after each
snowfall.
CAUTION
Please retain a copy of your point of purchase receipt. It will be required as reference when making
any warranty claim. Please check the municipal.by-law prior to setting up the product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time:
Tools Required for Assembly (not included):
30
minutes
N/A
Page 5