VEVOR BLC9010 Mode D'emploi page 3

SAFETY PRECAUTIONS
WARNING:
Read this material before using this product. Failure to do so can
result in serious injury.
Assembly precautions
1.Assemble only according to these instructions. Improper assembly
can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly.
3.Keep the assembly area clean and well-lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.Product capabilities apply to properly and completely assembled
product only.
7.Assemble on a flat, level, hard, and smooth surface capable of
safely supporting a fully loaded seat.
Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near
this item.
3. Do not exceed weight capacities, evenly distributed from the
bottom up. Be aware of dynamic loading! The sudden load
movement may briefly create an excess load, causing product failure.
4. Use only on a flat, level, hard, and smooth surface capable of
safely supporting a fully loaded seat.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS
- 2 -