VEVOR XSJ23-F08 Mode D'emploi page 3

Safety & Warning
Read and understand this entire manual before assembling, installing,

operating, or servicing this product. Failure to follow these warnings
and instructions can cause death, personal injury or damage to
valuable property.
Adhere to all Department of Transportation (D.O.T.) requirements

when using this product. Use ropes and tie downs (not included) to
securely hold all cargo in place.
For the vehicle that will support the Cargo Carrier, read all pertinent

vehicle instructions and warnings provided in the owner's manual.
Make sure the vehicle's engine is OFF, with parking brake set, before
loading or unloading the Cargo Carrier.
This Cargo Carrier must be attached to a 2" x 2" Class III or Class IV

hitch receiver. The hitch must be properly installed by a qualified
service technician and be certified to support the weight of this Cargo
Carrier and its contents.
This Cargo Carrier is designed to haul firewood, coolers, and other

similar loads. Do not modify the Carrier and do not use this product for
purposes that it was not designed for.
Do not overload the Cargo Carrier. Never exceed the maximum weight

capacity.
When assembly is complete, check and test all vehicle systems

including lights and brakes; make sure no damage occurred during
product installation.
Frequently check the condition of the Cargo Carrier and the vehicle's

hitch receiver. Make sure all components are in good condition. If the
Cargo Carrier or hitch receiver becomes damaged through accident,
or if any weld damage is noted, the product should be replaced. Check
to make sure that all hardware is tightly secured in place. Keep the
Cargo Carrier clean.
Use common sense when working. Stay alert and concentrate when

setting up and using the Cargo Carrier. Never work while under the
influence of alcohol, drugs or medications.
- 2 -