Network Setting; Internet - Rca Rnsm4003 Manuel D'utilisation

Network Setting

1.Press the " Menu " to enter, then pitch on the "Options",and press "ENTER" or click the
right button to enter the submenu.
2.Pitch on the "Network Configuration",and press "ENTER" or click right button to
enter the "Network Configuration".
3.When the wired network is used, if select dynamic IP address setting, pitch on
the"DHCP" in the "Network Configuration", then click the "Connect", and press the
"ENTER"button to enter.
If select static IP address setting,pitch on the "Static" in the "Network configuration",
then setting up the IP,Nemask,Gateway and DNS in sequence.When the setting
complete,pitch on the "Connect" and press the"Enter".
OSD Language
OSD Time
Closed Caption
Reset
Network Configuration
Software Update(USB)
View End-User License
Internet Update Check
28
Not Connected