VEVOR FT-04 Mode D'emploi page 14

CLEANING,MAINTENANCE AND TROUBLESHOOTING
1.Before use, please make sure that the dock ladder is installed firmly.
2.Before use,make sure the dock ladder is firmly fixed.
3.When assembling ladders, do not tighten all the screws first; Lock them
completely after the installation.
4.When checking the ladder, if some parts are slightly deformed, it can be
corrected with a mallet or other tools.
5.Do not overload the ladder when it is used.
6.If the ladder wobbles, stop using it, check whether it is loose, and tighten
it again.
7.After each use, remove sand and dirt from the dock ladder and rinse it off
with water.
8.If the ladder is not used for a long time, you are advised to disassemble
and store it.
9.If some parts of the ladder are seriously damaged. Stop using the ladder
and replace them.
Before storing ladders, clean and dry them and store them in a dry,
ventilated environment.
- 13 -