Jeulin REDY Mode D'emploi page 31

Data logging
REDY Optical oximeter Sensor
Ref : 488 015
•
The sensors management space opens automatically in the application.
The sensor appears in the sensors list.
In order to make sure that the desired sensor is detected, you can verify that the address
number written on the sensor screen, and that appearing in the application sensors list,
match.
This address number is unique for each sensor.
In the example above, it is the 001.
•
Note the apparition of the Bluetooth logo next to the sensor name, as well as the
message « Connected » in the end.
ENGLISH
Press on yes.
Start the connection by pressing on the desired sensor in the list. A temporary icon
appears, then the application confirms that the sensor is connected when the
indications below show on the screen
:
30