Allen + Roth 39BV239XCH 0297577 Instructions De Montage page 4

ASSEMBLY INSTRUCTIONS
If you are keeping the vanity (A) with
modesty box (B), please skip step 1 and
follow step 2 for installation.
1. If you prefer to have a more
contemporary look, you can remove
the modesty box (B), which
will expose the drain pipe.
To remove the modesty box (B), locate
bolt (AA) and washer (BB) in the
inside front wall of the modesty box (B)
and remove. Lift modesty box (B)
straight up.
NOTE: INSTALLATION TIP
It may be easier to install the faucet and
drain (not included) into the vanity (A)
before continuing to the next step.
Follow the faucet and drain manufacturer's
instructions for installation. Once the vanity
(A) has been mounted on the wall continue
with remaining plumbing installation.
2. Apply bead of silicone adhesive (not
included) onto the top edge of the
vanity (A) walls. Using two adults,
carefully place the top (C) onto the
completed vanity (A). Clean any
excess adhesive before allowing
to dry.
NOTE: Before mounting the vanity against
the wall make sure that it is lined up well
with the plumbing and that the wall has
been prepared for mounting the top (C).
All manuals and user guides at all-guides.com
1
Hardware Used
AA
BB
2
4
AA
BB
B
A
Bolt
Washer
C
Apply Adhesive
x 1
x 1
Mounting Holes