Hardware Contents; Safety Information; Preparation - Allen + Roth 39Bv239Xch 0297577 Instructions De Montage

HARDWARE CONTENTS

AA
Bolt
Qty. 1

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the
product. If you have any questions regarding the product, please call customer service at
1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
WARNING
• Some steps are more easily handled with two adults.
• Assembly and unpacking requires 2 adults.
• Do not try to pry off top from vanity. Damage to top or vanity may occur.
CAUTION
• Before installation, carefully use scissors or utility knife to cut and unwrap all parts. Make sure you
do not discard the hardware.
• Use care when assembling your new vanity; take your time and follow the assembly
instructions closely.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt
to assemble the product. Contact customer service for replacement parts.
Estimated assembly time: 60 minutes and 24 hours for adhesive to dry.
Tools required for assembly (not included): Phillips Screwdriver, Utility Knife or Scissors, Power
Drill, Drill Bit, Wall Mounting Hardware, Adhesive
Helpful Tools (not included): Measuring Tape, Level
All manuals and user guides at all-guides.com
(shown actual size)
BB
Touch-Up Pen
Washer
(Not to Scale)
Qty. 1
CC
Qty. 1
3