Electrodes; First Use; Starting Up - Jeulin Redy Gsr Mode D'emploi

Data logging
REDY GSR Sensor
Ref: 488 063

3. First Use

When receiving your sensor, and before the first use, it is recommended to fully charge
the battery.
Use the USB-C cable supplied to connect the sensor to a USB port of a computer, or a
power outlet via a universal charger (like the USB mains charger ref. 805819, not
supplied)
Before each practical work, plan to fully charge the device.
The battery life varies depending on the conditions of use and the number of
measurements and is designed to ensure a full practical session.

4. Starting Up

Press the Power button.
The device turns on. Place the electrodes on the index and middle fingers of the same
hand. The value measured appears on the screen.
Your device is ready for use.
ENGLISH

2.2 Electrodes

14
GSR